Pneumax

Product Details:

Pneumax - 1500.U MAGNETIC UNIVERSAL SENSOR WITH LED FOR CYLINDERS & MICROCYLINDERS REED TYPE WITH 2M CABLE1500.U

Product Details:

1580.U 1580.UAP 1580.HAP MRS.U MRS.UAP MHS.P Reed bulb sensor with led and cable 2 wires l=2,5mt. PNP sensor, REED type with led and 3 wire cable L=2.5mt. PNP sensor Hall effect with led and cable 3 wires l=2,5mt. Reed bulb sensor with led and cable 2 wires l=300mm and M8 connector PNP sensor, REED type with led and 3wire cable with M8 connector, cable L=300mm PNP sensor Hall effect with led cable 3 wires l=300mm and M8 connecto

Additional Information:

• Item Code: 1580.UAP
• Production Capacity: Refer Datasheet
• Delivery Time: Ready

Product Details:

We are engaged in offering a wide range of Pneumax Suction Cups to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

The 1700 Series electronic proportional regulators, in new fieldbus versions EtherCAT and PROFINET IO RT, are available in three sizes with flow rates of 7, 1100 and 4000 Nl/min.
The aluminum body, the compact design and the possibility to be mounted in different positions, guarantee maximum reliability and great installation flexibility to meet customer needs. The M12 IN/OUT connectors, the integrated display for viewing and manage command parameters ensure simple, fast and safe setup.

Product Details:

The Series 1800 Electric cylinders are available four sizes, 32-40-50-63, and can be provided with or without in line or parallel mounted electric motors by Siemens. In the event of the customer wanting to use they’re own electric motor, Pneumax can provide the required assembly kits upon request.

Product Details:

Filter+Regulator+Lubricator 1/4" with Gauge, pressure 0.5-10Bar, 5 micron, make Pneumax

Additional Information:

• Delivery Time: ready stock

Product Details:

FILTER , REGULATOR AND LUBRICATOR , SIZE 1/2" , 05 Micron

Additional Information:

• Delivery Time: ready stock

Product Details:

Modern industrial applications require increasingly high performances from their pneumatic components. For example, the speed and thrust of a pneumatic actuator may need to be varied. These parameters often need to be modified dynamically while an operation is running.
This solution can be achieved by means of a regulator that can vary pressure over time.
Pneumax portfolio includes 1700 Series electronic proportional regulator, available in three different sizes with flow rates of 7, 1100, and 4000 Nl/min respectively and supporting Analog/Digital, CANopen® or IO-Link communication interfaces.

Product Details:

Technical innovation, rational design, high performance and extremely compact size: these are the main features the ENOVA® series bring to the market.
Each valve comprises all the necessary pneumatic and electrical functions needed to produce a solenoid valve assembly.
There are no limits to the configuration of the solenoid valve island, as full priority has been given to the end user’s needs; the addition or removal of modules is a simple operation that can be swiftly and easily achieved.
The management of the electrical signals through the valves is optimized through a patented dedicated connector in each valve. Electrical connections are made via a twenty-five pin connector, which is capable of controlling up to twenty-two solenoids. Electrical and pneumatic connections are located on the same module at one end of the assembly.
Serial bus nodes compatible with most common protocols are easily integrated.
Most widely used and known communication protocols, such as PROFIBUS DP, CANopen®, DeviceNet, AS-interface can be directly integrated with the valve manifold by simply plugging the necessary module onto the electrical connection, maintaining IP65 environmental protection.
The management of inputs has also been foreseen, and can be achieved by adding one or more expansion modules directly to the serial module.
Shifting time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001, Pneumatic fluid power-Directional control valves-Measurement of shifting time.

Product Details:

Rodless cylinder based on the stainless steel strip sealing technology widely used and tested on bigger bore sizes.
Available versions: sliding shoe as standard (“MH”).
This system ensures high resistance and long life as the carriage which supports the weight is not tied to the piston and therefore the piston only transfers the movement without bearing any force.
Air connections: M5 threaded connections.
All air connections on one end cap version available. (side-back-bottom side)
Mountings:
– Foot brackets and intermediate supports if needed (depending on the stroke)
– Swivel bracket
– Directly in position via the slot on the end caps- in this conditions the air supply can come directly from the mounting plate.
Magnetic sensors: sensors series (1590…. , LRS…. and LHS….) can be used directly in the 2 slots on the barrel.

Product Details:

Construction characteristics:
– High flow rate thanks to Body configuration with inclined seating
– Anti water hammer functioning with input below poppet
– Pneumatically operated valve with stainless steel body, resistant to ambient corrosion
– Self-levelling poppet to ensure improved sealing
– Optical position indicator
– Self-adjusting maintenance free stuffer seals package
– Valves may be mounted in all positions
OPTIONS (on request):
– Double acting versions are available on request
– Connection type: GAS ISO / NPT

Technical characteristics (Valve body):
– Material: AISI 316/304 stainless steel
– Fluid temperature: -10°C … + 180°C
– Ambient temperature: -10°C … + 80°C
– Fluid viscosity: max. 600cSt.
– Poppet: PTFE
– Seals package: PTFE and FKM

Technical characteristics (Poppet):
– Body: AISI 304
– Pilot fluid: dry or lubricated air,
gas and neutral fluids.
– Fluid temperature: max. +60°C.

Product Details:

We are engaged in offering a wide range of Pneumax Filtration Unit to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Single stage vacuum generator G3/8” – 19M38.S.15.SS.00

Additional Information:

• Production Capacity: refer datasheet

Product Details:

We are engaged in offering a wide range of Pneumax Multifunction Vacuum Generator to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of Pneumax Vaccum Digital Gauge to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of Pneumax Pressure Booster Pump to our clients. Our range of all products is widely appreciated by our clients.