Tanupp India
Bhoopseda, RIICO Industrial Area Neemrana, Alwar, Rajasthan
GST No. 08DVBPM4907D1ZQ
TrustSEAL Verified
Call 0794255768293% Response Rate
SEND EMAIL
Product Details:
| Mounting Type | Surface Mounting |
| Model Name/Number | TDR-4 |
| Dimensions (in mm) | 133 (H)x483(W)x260(D) |
| Weight | Approx 5 kg |
| Ingress protection | IP20 |
| Display Type | LED |
| Packaging Type | Box |
| Brand | Masibus |
asibus TDR-4 Time Distribution Rack amplifies input signal which is connected on rear side and distributes via different timing outputs. Time Distribution Rack (TDR-4) accepts signals like 1PPS, IRIG-B TTL, IRIG-B Modulated, NMEA (RS232) and Event from GPS and gives four isolated outputs of each signal same as input.
Time Signal Splitter TDR-4 is housed in a compact 19’’, 3U rack mounted package. It has nine output card slots and one power supply card slot. Each output card has 4 outputs thus maximum 36 outputs of different or same type possible in single TDR-4
Time Signal Splitter TDR-4 has High Intensity LEDs on each card to shows the power status of the card and four numbers of isolated outputs signal status. All the inputs are connected on the rear side & all the output signals are on the front of the equipment.
Time Signal Splitter TDR-4 has flexibility to choose from six different output cards 1PPS, IRIG-B TTL, RS232, RS485, IRIG-B Modulated, NTP and Event. Any signal output card can easily be inserted into any signal card slot excluding Power Supply Slot. If user requires more than four numbers of outputs then user has to insert another same type of the card in any slot of the TDR-4.
Time Signal Splitter TDR-4 has also facility to interface redundant GPS incase of any failure occur with the first GPS.
Features
Product Details:
| Usage/Application | Signal Isolation |
| Mounting Type | Horizontal |
| Model Name/Number | 9000c |
| Input Voltage | 24VDC |
| Output Voltage | 4-20MA |
| Brand | Masibus |
| Packaging Type | Box |
| Country of Origin | Made in India |
Masibus 9000C Signal Isolator is slim yet rugged 4-wire and 2-wire isolator used for reliable isolation and attenuation of industry standard field signals. 9000C is available in Single or Dual output models.
9000C has higher noise rejection ratio that ensures accurate and noise free signal conditioning. Its Slim DIN rail mount design occupies less space and reduces cost of overall installation.
With DOP (AP only), this model also acts as Signal distributor/converter. A typical application could be where the signal has to be distributed for indication on local panel, field control room, main control room or DCS system. The Isolator provides good protection to sensitive system parts against voltage spikes,Noise etc. Model 9000C (AP) has built-in Transmitter Power Supply (TPS) to drive field transmitters delivering 0/4-20 mA DC outputs signal.
An exceptional feature of advanced extended universal power supply for the range of 20V to 265V DC or AC makes 9000C suitable for power supply range available in field thus providing easy installation and stock.
9000C ‘M’ version model is further enhanced with Switch selectable I/O configuration for I/O ranges 0/4-20mA, 0/1-5V and 0-10V. This feature allows user to have freedom to change 0/4-20mA, 0/1-5V and 0-10V I/O types, using switch available on side of device and with minor tuning using front accessible trim-pots, depending upon field requirements.
With 9000C ‘L’ LP Version, overall wiring can be reduced availing same performance and overall power consumption can be reduced.
Dedicated 9000C model with HART pass through feature, (available in AP only) compatible with 2-wire transmitter, allows user to configure HART compatible transmitters without disrupting HART signals and wirings.
Masibus 9000C model offers excellent accuracy and stability for reliable operation in hostile environments and full 3-port isolation safely separates input channel, each output channel and the power supply.
9000C Signal Isolator used as a Signal Conditioner, Signal Splitter, Signal Converter, Isolated Barrier, Signal Amplifier. 9000C SOP is CE Mark Isolator version
Features
Product Details:
| Usage/Application | Industrial |
| Model Name/Number | Tt7s10 |
| Brand | Masibus |
| Voltage | 24VDC |
| Packaging Type | Box |
| Output Value | 4-20mA |
| Input Value | PT100 |
| Country of Origin | Made in India |
TT7S Series Transmitters are designed for isolated and accurate temperature measurements and signal conditioning applications. TT7S10 is 2-wire loop powered model and TT7S11S is 4-wire auxiliary powered model. TT7S10 and TT7S11S are available in DIN rail version and TT7S10-H is available in head mount version. All the models are programmable for thermocouples, Pt-100 RTD, mV and resistance/potentiometer. Output signal is standard 4-20mA in 2-wire and mA or volts in 4-wire models. Programming of the transmitters is easy by means of user friendly mTRAN windows based configuration software.
TT7S Series Transmitters are built using the latest technology to deliver high performance in accuracy, resolution, stability and isolation. Zero/Span adjustments, sensor break detection/protection, reverse output and reverse polarity protection are standard features across all models.
Software techniques like polynomial linearization and digital filtering gives linearized and stable output in harsh industrial conditions, high level of isolation between input and output prevents ground loop errors and protects costly measurement and control systems under fault conditions.
mTRAN a windows based software is used for configuring, calibration and monitoring the TT7S Transmitters.
Features
Product Details:
| Brand | Masibus |
| Model Name/Number | VT7S12E |
| Mount Type | Wall Mount |
| Surface Finish | Painted |
| Packaging Type | Box |
| Output Proportional | 4-20mA |
| Relays | 4 Relays |
| Country of Origin | Made in India |
VT7S12E is the most advanced & Compact Vibration Transmitter. It accepts input directly from ICP type Accelerometer, processes the signal and gives analog output in the form of standard current or voltage; the vibration measurement range is field configurable for acceleration, velocity or displacement. The output signal is usually interfaced with PLC or DCS for monitoring and protection. VT7S12E Transmitter has two Relay outputs per channel for Alarm, Trip. Also has additional outputs like Buffered output on BNC connector for analysis purpose, and optional RS485 serial port for direct interface with PLC, DCS or SCADA. VT7S12E is aimed for balance of plant equipments like Pumps, Motors, Fans, Blowers, etc to provide monitoring and protection, the unit Employs True-RMS and calculated RMS-Peak measurement techniques, considered best for general machine condition monitoring. The unit can be field configured and operated by means of front keyboard and display, Relay set points and logic can be set for all application types including fail-safe operation, all configured data is stored in a non-volatile memory.
Features
Product Details:
| Usage/Application | Industrial |
| Model Name/Number | TT7S10-D, TT7S10-XP |
| Brand | Masibus |
| Voltage | 24VDC |
| Accuracy | 0.1 |
| Packaging Type | Box |
| Country of Origin | Made in India |
Masibus Model TT7S10-D/TT7S10-XP is a 2-Wire Loop Powered & fully programmable Temperature Transmitter with Display, designed for Isolated and accurate temperature measurements and signal conditioning applications.
Model TT7S10-D is Din Rail Mount 2 wire Temperature Transmitter and Model TT7S10-XP is Ex-proof Temperature Transmitter available in Single or Dual compartment enclosure having Wall or 2″ Pipe mount option.
TT7S10-D/TT7S10-XP is programmable temperature transmitter for Thermocouples, Pt-100 RTD, mV and Resistance/Potentiometer. Output signal is standard 4-20mA in 2-wire mode. A built-in 4 digit LED display facilitates the user to monitor process value and helps in instantaneous configuration and calibration. Transmitters have Process Temperature value display setting for °C, °F & K. Programming of the Transmitter is done either by keyboard or user friendly mTRAN windows based configuration software.
Product Details:
| Model Name/Number | TT7S00-HR |
| Brand | Masibus |
| Frequency | 50-60Hz |
| Packaging Type | Box |
| Output Value | 4-20 mA |
| Input Value | Pt100 |
| Country of Origin | Made in India |
TT7S00-HR is low cost Analog Linearized non-isolated 2-wire Head mount Transmitter, solder pads selection and potentiometer adjustments makes the Transmitter suitable for multi-range applications; the electronics is rated to withstand high temperature, protected by potting and housed in a rugged enclosure for reliability.
The Transmitter is sized for DIN B sensor heads with ergonomically placed terminals and potentiometers for ease of wiring and adjustments, the output is fully linear to temperature and load independent, with just 6.5V drop across the output, large loads can be connected in the loop.
For sensor break the unit can be configured for upscale or down scale output, sensor lead wires are compensated for up to 15 ohms per lead in 3W connection.
TT7S00-HR is the most cost effective transmitter for Pt-100 input where Isolation between Input and Output is not required, the electronics is optimized to give the best performance at a very low cost, the PCBs are machine soldered for utmost reliability, every unit undergoes a stringent quality and calibration check and supplied with a test report each.
Masibus has 39 years of design experience and is known for delivering quality Instrumentation products cost effectively
As a Pt-100 Transmitter in
Product Details:
| Usage/Application | Signal Isolation |
| Mounting Type | Vertical |
| Model Name/Number | 9000L & 9000LE |
| Input Voltage | 24VDC |
| Output Voltage | 4 mA |
| Brand | Masibus |
| Rated Current | 20 mA |
| Packaging Type | Box |
| Country of Origin | Made in India |
Masibus 9000L and 9000LE Signal Isolators are compact yet rugged Isolators used for reliable isolation and transformation of industry standard field signals. 9000L model is available in one input with one or two output. 9000LE is available in one and two channel input/output with isolation.
9000L series Isolators are highly accurate, have low drift, low temperature coefficient, fast response, high noise rejection and housed in a compact DIN-Rail mount enclosure.
Model 9000L has Aux supply range of 20 to 265V AC/DC as a unique feature whereas model 9000LE has option of 2W Transmitter Input with HART pass through. With dual output option, these models also acts as signal distributor.
A typical application could be where the signal has to be distributed for indication on local panel, field control room, main control room or DCS system. The isolator provides a good protection for sensitive system parts against voltage spikes etc.
Features
Product Details:
| Current Rating | 5mA |
| Usage/Application | Industrial |
| Mounting Type | Horizontal |
| Model Name/Number | 9000U+ |
| Input Voltage | 0/4-20 mAdc,0 -10 Vdc,1-5 Vdc |
| Brand | Masibus |
| Packaging Type | Box |
Masibus 9000U+ Signal Isolator is compact yet rugged 4 wire Isolator used for reliable Isolation and Attenuation of Industry Standard Field Signals. 9000U+ is available in Single or Dual output models. 9000U+ has higher noise rejection ratio that ensures accurate and noise free signal conditioning. It’s Slim DIN Rail mount design occupies less space and reduces cost of overall installation. With Dual output option this model also acts as Signal distributor. A typical application could be where the signal has to be distributed for indication on local panel, field control room, main control room or DCS system. The Isolator provides a good protection for sensitive system parts against voltage spikes etc. Model 9000U+ has built-in transmitter power supply (TPS) to drive field transmitters delivering 4-20mA DC outputs signal. An exceptional feature of advanced extended universal power supply for the range of 20V to 265V DC or AC makes 9000U+ suitable for most of the power supply range available in field thus providing easy installation. Masibus’ 9000U+ Model offers an excellent accuracy and stability for reliable operation in hostile environments and full isolation safely separates input channel, each output channel and the power supply.
Masibus 9000U+ Signal Isolator is compact yet rugged 4-wire Isolator used for reliable Isolation and Attenuation of Industry Standard Field Signals. 9000U+ is available in Single or
Product Details:
| Model Name/Number | LC11 |
| Material | Plastic |
| Display Type | Digital |
| Brand | Masibus |
| Packaging Type | Box |
| Features | Advanced |
| Size | 185.6 mm x 97.1 |
| Country of Origin | Made in India |
tCAL model TC12+ is portable Calibrator, multifunction Calibrator and high accuracy Temperature Calibrator. It is compact, rugged and easy to use hand held calibrator with graphical user interface for precise measuring and sourcing of electrical and physical parameters.Masibus TC12+ Process Calibrator is designed to provide the best accuracy in all modes of operation. TC12+ has Source and Measurement capability with independent parameter and range selection for Source and Measure. TC12+ has mA/ V/ mV/ mA (2W)/ Switch-test / RTD/ TC/ measurement capability and also has Resistance/ RTD/ TC/ source capability. There is an isolation between measure and source/ measure sections.
TC12+ Temperature Calibrator has easy to operate short cut keys SCR1 and SCR2 for input selection for measure and source/measure respectively. Automatic step/ ramp output with Auto/ Man selection, data logging, Max/ Min/ Average values, scaling to engineering units and filter settings enhances the use of Temperature Calibrator. It has been designed to give maximum Battery life on full charge, the backlight is adjustable for power saving and the display can be programmed to automatically enable the glance screen when not in use.
TC12+ comes with a Mini USB connector for charging, logged data retrieval and firmware upgrade. Standard accessories provided are patch cables, charger, USB cable, instruction manual, logged data retrieval software CD and calibration certificate, all in an attractive carrying case.
It also used as a Multifunction Thermocouple Calibrator, Thermocouple Calibrator, Thermocouple simulator, RTD Calibrator, RTD simulator
Product Details:
| Language Supported | English |
| Is It Magnetic | Non Magnetic |
| Viewing Distance | 10 Meters |
| Packaging Type | Box |
| Model Name/Number | DDU-XX |
| Brand | Masibus |
| Display Type | Digital |
Masibus Digital Power Display Unit DDU-XX Slave Clock a versatile, multi-featured code driven Digital Display Clock for NTP Servers. It displays parameters like Time, Date, Day and Frequency. This Digital Display Clock for NTP Servers decodes and displays all Time protocols like IRIG-B modulated/ TTL, NTP (Ethernet) and Serial (NGTS, NMEA and TFormats). IRIG-B decoding supports the 1 KHz modulated format (B12x) and the TTL format (B00x).
The Digital Display Clock for NTP Servers has built-in Battery backed RTC which maintains time in case of loss of power and communication break. Redundant Input option is available for critical installations.
The 100mm large display can be viewed from a distance of over 50m.
The rugged aluminum case makes DDU-XX GPS based Slave Clock ideal for demanding industrial environments. Flush LED display of DDU-XX Slave Clock offers a wide angle viewing. Time, Date, Day & Frequency Displays are available in both Panel & Wall mount versions. Day Display is of Dot Matrix LED type.
Product Details:
| Phase | Single Phase |
| Model Name/Number | PM 2140 |
| Type | Meter |
| Voltage | 240 V |
| Display Type | Digital |
| Current Ampere | 6 A |
| Brand | Masibus |
| Packaging Type | Box |
| Version Of Communication | Multifunction |
| Country of Origin | Made in India |
Masibus PM2140 Digital Power meter is an easy-to-use, low cost electrical panel meter that offers all the basic measurement capabilities required for monitoring an electrical installation.PM2140 power-meters has 3 Line 4 digit bright 0.4” LED display for superior readability in poor lighting conditions. Phase wise parameters display has been provided along with various LED indications. PM2140 is available in flush panel mount enclosure having front panel keys for easy set up. PM 2140 EnergyMeter has Class 1.0 accuracy as per IS 13779/IEC 62053-21 for Energy and better than 0.5% accuracy for basic instantaneous parameters.
The CT/PT ratio and installation type is site selectable, making the meter possible to be used in various types of three phase installations. More than a basic metering, it provides RS485 port with Modbus-RTU protocol as a standard feature & Relay/ Analog output as optional features. PM2140 Multi-Functional Power Meter provides all the basic electrical parameter measurement along with Minimum, Maximum logging, Isolated Relay Output with alarm
Product Details:
| Transducer Type | Power Transducer |
| Power Type | AC |
| Brand | Masibus |
| Voltage | 240 V |
| Dimensions | 45 mm x 75 mm x 105 mm |
| Functional Temperature Range | -20 to +70 Deg C |
| Operating Temperature Range | -5 to +55 Deg C |
| Storage Temperature Range | -25 to +70 Deg C |
Masibus Multifunction Transducer MFT20 is used to measure and convert parameter of Three-phase 3wire/4wire AC power network with balanced or unbalanced system.It measures all sought of electrical parameters including voltage, current, PF, power and energy. All essential measuring values can be programmed to the output and are available through modbus communication.
High sampling rate and true RMS measurement gives accurate reading under all harmonic conditions; measured electrical parameters in Dual output Multifunction transducer can be converted to equivalent current or voltage signals. These signals can be flexibly assigned upto two analog o/p channels. Any parameter can be assigned to any channel as well as single parameter can be assigned to multiple channels. Programmable Multifunction transducer has isolated interface between device internal electronics and field to ensure personal safety.
Product Details:
| Model Name/Number | 406/406L/408-M |
| Mounting Type | Panel Mount |
| Display Type | Digital |
| Usage/Application | Industrial |
| Accuracy | +-0.25% of full span + 1 DegreeC for T/C and RTD input +-0.1% of full span + 1 count for linear inpu |
| Power Supply | 85-265VAC / 100-300VDC 18-36VDC |
| Packaging Type | Box |
| Brand | Masibus |
| Country of Origin | Made in India |
Masibus’ Digital Indicator Model 406, 406L and 408-M is a micro-controller based 4 digit process indicator, designed to accept multiple input types. Model 406, 406L have 0.56″ display size and model 408-M has 0.8″ display size which facilitates plant operator to read process data very conveniently from a far distance.
Both models are equipped with field selectable inputs and field scalable ranges for flexible operations.
Built-in transmitter power supply eliminates the need of additional power supply to excite field transmitter, which makes this model well equipped.
It is a low cost high performance indicator which offers high accuracy of ±0.25% of full scale. This model can be used for Pt100, five different types of thermocouples and four types of linear inputs.
It is easy to operate and configuration is user friendly. CJC compensation for thermocouple input is done through software for higher accuracy. The input is protected from reverse connection and over range inputs.
Product Details:
| Model Name/Number | 408-2IN |
| Mounting Type | Wall Mounted |
| Display Type | Digital |
| Shape | Rectangular |
| Frequency | 50 hz |
| Packaging Type | Box |
| Brand | Masibus |
| Country of Origin | Made in India |
Masibus 408-2IN Indicator cum Controller has bright seven-segment 1.8” LED display for process value that can be monitored upto a distance of 20 meters. It has status LEDs for set point indication.
Model 408-2IN accepts major industry standard inputs like RTD, thermocouples, mA, Volts etc. It provides two relay outputs to perform various control and alarm functions. Intuitive configurations with three front keys ensure easy programming. Process value can also be retransmitted to remote devices as standard current/voltage signals. Data acquisition can be done on SCADA/PLC applications through RS485 communication for further process automation.
Masibus 408-2IN model is designed using proven micro-controller technology. These controllers have been validated to perform accurate and reliable performance, reliable control for various process applications. Alarm can be configured for two set points which are indicated on front Status LEDs. This Indicator has SMPS power supply for smooth and reliable performance. It is also equipped with transmitter power supply.
Masibus 408-2IN large display temperature indicator, Large display process indicator is suitable as remote display application.
Product Details:
| Packaging Type | Box |
| Brand | Masibus |
| Frequency | 50-60 Hz |
| Power | 100 to 240 VAC |
| Controller Type | PID,on-off |
| Display Type | Digital |
| Model Name/Number | 5006RN LC5296H |
Accurate, reliable control of various process applications is provided by Masibus series of ON/OFF controllers with enhanced hardware capabilities in compact enclosure of different size.
Masibus Series of ON/OFF Controllers are available in various options having display size of bright seven-segment 0.56” and 0.8” LED display for process value.
It accepts universal input and provides two relay outputs to perform various control and alarm functions. Intuitive configurations with four front tactile keys ensure easy programming.
Process value can also be retransmitted to remote devices as standard current/voltage signals. Data acquisition can be done on SCADA/PLC applications through RS485 for further process automation.
Designed using proven micro-controller technology, these controllers have been validated to perform accurate and reliable performance in harsh field environments.
Features
Product Details:
| Model Name/Number | TC12+ |
| Material | Plastic |
| Display Type | Digital |
| Usage/Application | Industrial |
| Temperature Range | 0 to 999999 pulses |
| Brand | Masibus |
| Country of Origin | Made in India |
tCAL model TC12+ is portable Calibrator, multifunction Calibrator and high accuracy Temperature Calibrator. It is compact, rugged and easy to use hand held calibrator with graphical user interface for precise measuring and sourcing of electrical and physical parameters.Masibus TC12+ Process Calibrator is designed to provide the best accuracy in all modes of operation. TC12+ has Source and Measurement capability with independent parameter and range selection for Source and Measure. TC12+ has mA/ V/ mV/ mA (2W)/ Switch-test / RTD/ TC/ measurement capability and also has Resistance/ RTD/ TC/ source capability. There is an isolation between measure and source/ measure sections.
TC12+ Temperature Calibrator has easy to operate short cut keys SCR1 and SCR2 for input selection for measure and source/measure respectively. Automatic step/ ramp output with Auto/ Man selection, data logging, Max/ Min/ Average values, scaling to engineering units and filter settings enhances the use of Temperature Calibrator. It has been designed to give maximum Battery life on full charge, the backlight is adjustable for power saving and the display can be programmed to automatically enable the glance screen when not in use.
TC12+ comes with a Mini USB connector for charging, logged data retrieval and firmware upgrade. Standard accessories provided are patch cables, charger, USB cable, instruction manual, logged data retrieval software CD and calibration certificate, all in an attractive carrying case.
It also used as a Multifunction Thermocouple Calibrator, Thermocouple Calibrator, Thermocouple simulator, RTD Calibrator, RTD simulator.
Features
Product Details:
| Brand | Masibus |
| Voltage | 2240 v |
| Current | DC |
| Material | ABS |
| Display | Digital |
| Display and Set Point Range | -50.0 to 300.0 deg.C or -50.0 to 250.0 deg.C |
| No. Of channels | 8 |
Product Details:
| Phase | Single Phase |
| Model Name/Number | 2160-A |
| Voltage | 240 v |
| Display Type | Digital |
| Usage/Application | Industrial |
| Brand | Masibus |
| Packaging Type | Box |
| Country of Origin | Made in India |
Product Details:
| Measuring Current | AC |
| Brand | Masibus |
| Power | 90-270VAC / 110-370VDC |
| Voltage | 220 v |
| Product Type | Frequency Transducers |
| Color | White |
| Packaging Type | Box |
| Country of Origin | Made in India |
Masibus Multifunction Transducer MFT20 is used to measure and convert parameter of Three-phase 3wire/4wire AC power network with balanced or unbalanced system.It measures all sought of electrical parameters including voltage, current, PF, power and energy. All essential measuring values can be programmed to the output and are available through modbus communication.
High sampling rate and true RMS measurement gives accurate reading under all harmonic conditions; measured electrical parameters in Dual output Multifunction transducer can be converted to equivalent current or voltage signals. These signals can be flexibly assigned upto two analog o/p channels. Any parameter can be assigned to any channel as well as single parameter can be assigned to multiple channels. Programmable Multifunction transducer has isolated interface between device internal electronics and field to ensure personal safety.
Product Details:
| Model Name/Number | 2310/ 2330 |
| Brand | Masibus |
| Display Type | Digital |
| Mounting Type | Panel |
| Power Supply | 240V AC +-20%, 110V AC +-20% |
| Packaging Type | Box |
| Shpae | Square |
| Country of Origin | Made in India |
Masibus Digital VAF Meter 2310 & 2330 are an easy-to-use, cost effective electrical VAF Indicators that offer all the basic measurement capabilities required for monitoring an electrical installation. It offers Class 1.0 accuracy. This Indicator measures accurately all three parameters Voltage, Current and Frequency.
Digital VAF Meter is available in flush panel mount enclosure having front panel keys for easy setup.
The CT/PT ratio and PT secondary is site selectable, making it possible to use the meter in various types of three phase & single phase installations.
Masibus VAF meter 2310/2330 is a range of digital panel meters for reliable and accurate measurement of AC parameters (voltage, current, frequency) for industrial and commercial applications. It provides true RMS
Product Details:
| Brand | Masibus |
| Model Name/Number | MTS200L |
| Timing Accuracy | < 15 ns with GNSS (GPS + GLOANASS) receiver (receiver is locked on fixed position) |
| Positioning Accuracy | < 10m |
| Input Frequency | 1575.42 MHz L1 C/A code |
| Type | Active L1. GNSS (GPS + GLOANASS), 40 dB gain |
| Packaging Type | Box |
| Country of Origin | Made in India |
Masibus masTER Time-Sync MTS200L is GNSS time server and capable to serve time synchronization requirements in various industries like power, process, Datacentres and IT Networks, telecom, Oil and Gas, Cement, Paper, Chemical, Fertilizer, Security and Surveillance etc. MTS200L is a Network time server housed in a compact and modular 19″ 1U rack monted package that can accomodate all power supply, CPU, clock as well as multiple timing output card.
Masibus MTS200L is a GPS/GLONASS based time server has both redundant and non-redundant option. When considered with redundant option, provides complete redundancy over Power supply a functionality for reliable and continuous operation. MTS200L network time server has a 20 x 2 LCD display for viewing of time parameters, status of GPS receiver parameters and discrete LEDs provide at-a-glance status and health information. In addition to above, it provides flexibility to choose from available different output card options like 1PPS, IRIG-B TTL (DCLS) / IRIG-B Amplitude Modulated , NTP/SNTP, Serial NMEA frame over RS232/RS485, Event/Relay, IEEE 1588 PTPv2, Pulse FO, 2.048 MHz frequency (E1) output, Frequency deviation output over RS485. MTS200L GPS Master clock is TCXO/OCXO based built-in RTC backed up with on board rechargable battery to maintain time during power loss and instant recovery on power resumption. MTS200L is a Low cost GPS Clock which provides maximum 16 number of timing output.
Product Details:
| Weight | 0.9 Kg(Approx) |
| Humidity | 20 - 90% (Non-condensing) |
| Model Name/Number | MC-1-DE, MC-1-DH |
| Width | 143mm |
| Brand | Masibus |
| Packaging Type | Box |
| Depth | 140 mm |
Masibus GPS Master Clock MC-1-DE & MC-1-DH are the most compact and accurate Time Synchronization Units developed for various industries like the Power and Process industry. It has the options of various output types, required for interface with various systems and devices.GPS Master Clock MC-1-DH model has 7-segment LED display (date/time configuration). The unit is constructed in a form factor suitable for DIN Rail, Wall mount or Panel mount option. GPS Time Sync Unit is designed for Reliability and provides base time accuracy of 150nsec.
GPS Time Sync Unit supports time code and pulse signals complying with standards like RS232/485 serial, PPS, IRIG-B, NTP, these outputs have ample drive capability to drive multiple loads in parallel and its parameters are fully configurable. The GPS receiver has built-in RTC backed up with on board battery to maintain time during power loss and instant recovery on power resumption. It also has very low ppm crystal to maintain accurate time when GPS signal is lost.
GPS Time Sync Unit has discrete LEDs that provide at-glance status and health information. Parameters like IP, gateway and subnet mask are programmable through Ethernet port. MC-1-DE is also programmable via hyper terminal on the serial port
In case of more than one Ethernet port, each port is individually programmable only for network related parameters.
Masibus has four decades of design experience and has supplied hundreds of GPS clocks for the most demanding applications in the power and process industries. Masibus clocks have been successfully interfaced with all types of devices like DFR, SOE, Relays, PLC, DCS, IEDs, servers and many more.
Product Details:
| Color | White |
| Brand | Masibus |
| Model Name/Number | MTS200 |
| Packaging Type | Box |
| Firmware Upgrade | Via Webserver, USB |
| Type | Active L1. GPS, 30 dB gain |
| Antenna Cable | RG 6(Std) / RG 8 (Optional) coaxial cable |
| Country of Origin | Made in India |
Features
Product Details:
| Power Supply | <15 Watt |
| Brand | Masibus |
| Model Name/Number | MC-1-U |
| Voltage | DC 17 V |
| Mounting Type | Rack Mounted |
| Packaging Type | Box |
| Material Type | ABS |
Masibus MC-1-U is a GPS time server and capable to serve time synchronization requirements in various industries like power, process, Datacentres and IT Networks, telecom, Oil and Gas, Cement, Paper, Chemical, Fertilizer, Security and Surveillance etc. MTS200L is a Network time server housed in a compact 19″ 1U rack monted package that can accomodate all power supply, CPU, clock as well as multiple timing output card.
MC-1-U network time server has a 20 x 2 LCD display for viewing of time parameters, status of GPS receiver parameters and discrete LEDs provide at-a-glance status and health information. In addition to above, it provides flexibility to choose from available different output card options like 1PPS, IRIG-B TTL (DCLS) / IRIG-B Amplitude Modulated , NTP/SNTP, Serial NMEA frame over RS232/RS485, Event/Relay output. MC-1-U is TCXO based GPS Master clock has built-in RTC backed up with on board rechargable battery to maintain time during power loss and instant recovery on power resumption
Product Details:
| Work Temperature Range | 80 Deg C |
| Cable Length | 1 Meter |
| Humidity | 95% |
| Brand | Masibus |
| Model Name/Number | MUSB485 |
| Connector Type | Male Connector |
| Current Consumption | 20 mA |
| Country of Origin | Made in India |
Masibus Manufacturer of The mUSB232 & mUSB485 which is a family of communication devices. The USB media converters provide a simple method of adapting Industrial and commercial serial devices with RS232/485 interface to modern USB ports. Each media converters contains a small electronic circuit board mounted inside a rugged plastic enclosure capable of withstanding industrial temperature ranges. The integrated electronics also include RS232/RS485 level shifters and Tx/Rx LEDs to provide a visual indication of data traffic through the media converter.
The Cable incorporates a standard USB-A device connector for connection to an upstream host or hub port. RS232-level signals, including modem handshake signals, are available on an industry standard DE-9P connector cable. The RS232-level data rate range is 300 baud to 1 M baud.
The media converter cable requires USB device drivers, available free in CD supplied with media converter, which is used to make the media converter appear as a Virtual COM Port (VCP). This allows existing serial communications software, such as HyperTerminal, to exchange data through the media converter to industrial RS232/RS485 peripheral devices.
FeaturesUSB to RS232 Converter
USB to RS485 Converter
Product Details:
| Material | Mild Steel |
| Brand | Masibus |
| Model Name/Number | MTS200R |
| Packaging Type | Box |
| Screen Size | 2X20 |
| Display Type | LCD |
| Type | Wired |
| Country of Origin | Made in India |
Masibus masTER Time-Sync MTS200R is Redundant time server and capable to serve time synchronization requirements in various industries like power, process, Datacentres and IT Networks, telecom, Oil and Gas, Cement, Paper, Chemical, Fertilizer, Security and Surveillance etc. MTS200R is a Network time server housed in a compact and modular 19″ 1U rack monted package that can accomodate all power supply, CPU, clock as well as multiple timing output card.
Masibus MTS200R is a GPS/GLONASS based time server has redundant and non-redundant options.When considered with redundant option, provides complete redundancy over Power supply and GPS receiver functionality for reliable and continuous operation. CPU card has intelligent switching facility capable of handling GPS receiver redundancy logic along with each clock card healthy LED indication. MTS200R has a 20 x 2 LCD display for viewing of time parameters, status of GPS receiver parameters and discrete LEDs provide at-a-glance status and health information. In addition to above, it provides flexibility to choose from available different output card options like 1PPS, IRIG-B TTL (DCLS) / IRIG-B Amplitude Modulated , NTP/SNTP, Serial NMEA frame over RS232/RS485, Event/Relay, IEEE 1588 PTPv2, Pulse FO, 2.048 MHz frequency (E1) output, Frequency deviation output over RS485. MTS200R GPS Master clock is TCXO/OCXO based built-in RTC backed up with on board rechargable battery to maintain time during power loss and instant recovery on power resumption. MTS200R can provide maximum 12 number of timing output based on the choosen configuration.
Product Details:
| Type Of Tachometer | Digital Tachometer |
| Model Name/Number | 409-S |
| Brand | Masibus |
| Usage/Application | Industrial |
| Material | Plastic |
| Resolution | 0.1 RPM |
| Packaging Type | Box |
| Country of Origin | Made in India |
409-S RPM Indicator is for measuring the rotating speed of a Turbine or other rotating machines; it accepts input signal from proximity sensor/transducer based on eddy current principle, it can also accept input signal from other type of proximity sensors, photoelectric sensors, limit switches and rotary encoders, the unit has a isolated built-in 24V DC excitation supply to power the input sensors.
409-S RPM Indicator comes with 2 set points and relay outputs for Alarm and Trip purpose, the set points and relay logic can be user set for over speed/under speed Alarming and protection, the unit has built-in acknowledge logic for maintained as well as momentary Alarms, the relays can be configured for normal or fail-safe operation. Isolated Analog output by way of Current/Voltage is available for interface with PLC/DCS systems, also Isolated RS485 Modbus RTU port is provided to incorporate the 409-S in a plant wide SCADAsystem.
409-S RPM Indicator is compact, reliable and fit for most critical speed Monitoring and protection, the unit can be programmed for number of events/rotation and displays the speed from 1 RPM to 10000 RPM on a bright 5 digit display the brightness of which is adjustable to suit any environment.
Features
Product Details:
| USB Support Type | USB 1.1 |
| Material | PVC |
| Warranty | 1 Year |
| Usage/Application | Data sharing |
| Interface Type | ARM 926EJ-S / 200 MHz / MMU |
| Connector Type | Modbus RTU (RS-485) |
| Brand Name | Masibus |
| Country of Origin | Made in India |
Product Details:
| Usage/Application | Industrial Process Monitoring |
| Model Name/Number | SGT 18 |
| Brand | Masibus |
| Automation Grade | Automatic |
| Display Type | Digital |
| Weighing Applications | Dynamic and static |
| Load cell excitation Voltage | 5 to 15V DC |
| Country of Origin | Made in India |
Masibus SGT-18 a 4-wire Strain Gauge Transmitter converts strain gauge signal of strain gauge sensors such as load cells, pressure transducers and torque sensors into selected DC voltage or current output allowing direct connection to PLCs, dataloggers & displays.
4-digit, 0.3” Red seven segment display facilitates the user to monitor Strain gauge value. It displays field settable Gross or Net value.
SGT-18 Strain Gauge Transmitter accepts field selectable load cell input ranging from -10.00 to 99.99 mV. It has built-in factory set load cell excitation voltage selectable from 5 to 15V DC. Tare adjustment can be done through keypad / digital input.
SGT-18 Strain Gauge Transmitter optionally also provides relay output for alarm and RS485 communication port for further connection with PLC/SCADA system. It can also be used as a Strain Gauge Indicator.
Product Details:
| Brand | Masibus |
| Model Name/Number | UT94 |
| Usage/Application | Ut94 Universal Transmitter |
| Voltage | 220VAC |
| Display Type | Digital |
| Accuracy | 0.5 |
| Operating Range | 220V AC |
| Protection Type | IP66 |
| Country of Origin | Made in India |
Masibus Model UT-94 is a 4-wire universal transmitter that isolates & converts wide range of conventional / unconventional process inputs into standard process signals acceptable to commercially off the shelf (COTS) automation products. Signal inverting option is also available. The input circuit can accommodate a variety of input signal levels including bi-directional, reverse, true and live-zero.
A built in 4 digit display facilitates the user to monitor process value and helps in fast configuration and calibration. Model UT-94 enables analog signals to transmit without galvanic connections between the fields to the receiving instrument. This in turn allows ground or reference levels to float up to thousands of volts at its input terminals, and prevents circulating current between differing ground potentials that can contaminate input signal.
Isolation provided by Model UT-94 saves the control system from damage due to accidental application of high voltage or induced voltages on the input signal and in turn avoids wrong output signals to process. Isolation provides a good protection for sensitive system parts against voltage spikes etc.
Model UT-94 offers a wide range of input/ output signal types include mA, mV, V, RTD, TC, Resistance. Built-in transmitter power supply (TPS) can drive field transmitters in case of 4-20mA DC input. It offers excellent accuracy and stability for reliable operation in hostile environments and full isolation safely separates each input channel, each output channel and the power supply.
Model UT-94 is equipped with advanced functions like digital filtering, password setting, input and output protection and square root function for optimum process functionality. It has optional two relays for alarm purpose along with optional isolated serial communication on RS485 over MODBUS RTU protocol for interfacing with SCADA/PLC, PC based data acquisition and reporting system. Additionally UT-94 has upto two completely isolated retransmission outputs wherein 2nd output is optional.
Features
Product Details:
| Phase | Single Phase |
| Transformer Type | Power Transformer |
| Model No | TPT-20 |
| Shape | Rectangular |
| Usage/Application | Electrical or Energy Management Systems,SCADA,Central Monitoring Systems,OLTC / Power Stations |
| Brand | Masibus |
| Packaging Type | Box |
| Country of Origin | Made in India |
Masibus Model TPT-20 is a 4 wire Tap Position Transmitter that isolates & converts the resistance input corresponding to the tap position of transformer and the Output is Proportional to tap position of transformer thus providing Visual and Electrical Output of tap position. The analog output can be further connected to RTU, Logger, PLC, Control units etc.
TPT-20 Resistance-type position transmitter accepts the input range of 0-2.5KΩ or 0-25KΩ. A built-in 4 digit Red LED display facilitates the user to monitor the tap position and helps in fast and easy configuration and calibration. Tap number is programmable upto 100 via keypad and tap change-over delay is 1-60 sec field programmable.
Model TPT-20 offers excellent accuracy and stability for reliable operation in hostile environments. TPT-20 has three port Isolation between Input, Output and Power supply.
TPT-20 has optional two relays for alarm purpose along with optional isolated serial communication on RS485 over MODBUS RTU protocol for interfacing with SCADA/PLC, PC based data acquisition and reporting system. So it is used as Transformer Tap Position Transducer with Communication or transformer tap position Transducer with Alarm. Additionally, TPT-20 has upto two completely isolated retransmission outputs wherein 2nd output is optional. It can also be used as a Digital Tap Position Indicator, Tap Position transducer, Digital Tap Position Repeater or Transformer Tap Position Transmitter
Features
Product Details:
| Model Name/Number | 409 |
| Brand | Masibus |
| Mounting Type | Wall Mounted |
| Display Type | Digital |
| Shape | Rectangular |
| Packaging Type | Box |
| Country of Origin | Made in India |
Masibus 409 is a micro-controller based 5 digit process indicator, Temperature indicator designed to accept multiple input types and two programmable set points with individual relays. Model 409 is a stable & rugged indicator, the first choice of OEMs and end users.
Model 409 accepts 21 different industry standard inputs with high accuracy of 0.1% to measure temperature, pressure and other process variables. It is easy to operate and configuration is user friendly. CJC compensation for thermocouple input is done through software for higher accuracy.
It can be interfaced with SCADA/PLC using optional RS485 communication and analog retransmission output for process automation. It has two-way communication facility allowing user to read and write PV over Modbus between any Master device and Indicator.
Alarm can be configured for two set points which are indicated on front Status LEDs. Model 409 has a powerful watchdog circuit with close monitoring of software loop that ensures the proper instrument operation in case of power spikes that are very common in industrial environment. This Indicator has SMPS power supply for smooth and reliable performance. It is also equipped with transmitter power supply.
Model 409 utilizes its unique feature of LED brightness control which enables plant engineers/ operators to adjust intensity of controllers’ LED display in order to achieve comfort for eyes.
Model 409 is equipped with advanced functions like digital filtering, password setting, input and output protection and square root function for optimum process functionality Digital input facility is available to reset process value logged for min & max value as ‘PV Hi’ & ‘PV Lo’ parameters respectively.
Model 409 smart indicator ,smart process indicator ,universal temperature indicator also use as indicator with Alarm and Trip application.
Product Details:
| Control Type | PID On/ Off |
| No of digits | 4+7 |
| Output type | Relay |
| Input Type | Current (mA) |
| Model Name/Number | LC 5296L-AT |
| Brand | Masibus |
| Packaging Type | Box |
Masibus LC5296-AT / LC5248E-AT / LC5296L-AT / LC5248L-AT / LC5296V-AT PID Controller series is designed to offer outstanding control performance in a compact package providing a comprehensive solution for a wide variety of applications: such as plastic manufacturing, packaging machinery and food processing applications requiring precise heat/cool control and processes protection alarming.
LC5296-AT / LC5248E-AT / LC5296V-AT PID Controller offer a cost-effective alternative to implement loops in a PLC while at the same time improving loop performance. It accepts one universal process input suitable for thermocouple, RTD or linear mA/Volt. All inputs and outputs can be read directly over the modbus communication interface by the supervisory host system as well as process value can be retransmitted to remote PLC/DCS. This expands capabilities of available PLC/DCS and host supervisory system I/O, simplifies machine troubleshooting and remote diagnostics.
LC5296-AT / LC5248E-AT / LC5296L-AT / LC5248L-AT / LC5296V-AT PID Controller With a fast responsive PID auto-tuning algorithm it is equipped with Heat/Cool relay or SSR output for control function. Auto-tuning adjusts the PID parameters for desired set-point according to the current process dynamics so it has no harmful effect on the current operation. It has flexibility to switch control to On-Off or manual mode for non-critical applications.
LC5296-AT / LC5248E-AT / LC5296V-AT PID Controller has outputs available providing a combination of relay (alarm output) and relay or SSR (control output) or Motarized valve Forward/Reverse without feedback (control output) based on application requirement. Whereas LC5296L-AT / LC5248L-AT PID controller has 3 outputs providing combination of 2 Relay (alarm output) or SSR (control output).
Compact size and simple programming makes the installation and operation of controller easier and user-friendly.
Features
Product Details:
| Control Type | PID On/ Off |
| Mounting Type | DIN Track Mounting |
| Model Name/Number | TC5396 |
| Input Type | Thermocouple, RTD |
| Brand | Masibus |
| Packaging Type | Box |
Masibus TC5396 PID Controller/Temperature controller/process controller/On Off temperature controller is designed to offer advanced performance at a competitive price, the controller comes with a Large White LED display plus 10 segment bargraph for display of MV, universal Input, multiple output options, ideally suited for a wide range of applications such as plastic processing machines, packaging machinery and food processing applications for PID temperature controller. The controller has four relay outputs which can be configured as control, auxiliary and Alarm.
TC5396 PID Controller improves process efficiency and quality, Input is truly Universal, configurable for any Thermocouple, RTD or mA/Volt. All inputs and outputs parameters are accessible over Modbus communication interface option, Retransmission option can be used for recording/datalogging.
TC5396 PID Controller has a advanced Auto-tuning function and can be set-up in different control modes from On-off, PID and Valve position control without feedback, control output type options include Relay, SSR and Analog, Manual mode override allows operator to manually control the process.
TC5396 PID Controller has extended Alarm capability, 15 different Alarm modes are possible for each Alarm output, the four relays can be configured for control output or Alarm based on the Actuator type.
The unit is easy to configure, operate and password protected, parameters that require frequent changes can be user selected and grouped in first level of access for quick
Product Details:
| Model Name/Number | 409-4IN & 409-6IN |
| Usage/Application | Industrial |
| Packaging Type | Box |
| Display Type | Digital |
| Mounting Type | Both Panel & Wall |
| Accuracy | 0.1 |
| Power | 24VDC / 220 VAC |
| Brand | Masibus |
| Country of Origin | Made in India |
odel 409-4IN and 409-6IN are the large display Indicator,Jumbo display indicator which can be monitored up to distance of 160 feet (50m). 409-4IN has 100 mm Red LED display and 409-6IN has 150 mm P10 based Red LED module display. Its large digit facilitates process value to be monitored across wider geographical area in plant. It has most advanced features for monitoring and communication of process status.
Model 409-4IN / 409-6IN accepts 21 different industry standard inputs with high accuracy of 0.1% to measure temperature, pressure and other process variables. It is easy to operate and configuration is user friendly. CJC compensation for thermocouple input is done through software for higher accuracy.
Model 409-4IN / 409-6IN can be interfaced with SCADA/PLC using optional RS485 communication and analog retransmission output for process automation. It has two-way communication facility allowing user to read and write PV over Modbus between any Master device and Indicator.
Alarm can be configured for two set points which are indicated on front Status LEDs. This Indicator has SMPS power supply for smooth and reliable performance. It is also equipped with transmitter power supply.
Model 409-4IN utilizes its unique feature of LED brightness control which enables plant engineers/ operators to adjust intensity of controllers’ LED display in order to achieve comfort for eyes.
Model 409-6IN display has a high brightness for outdoor application.
Model 409-4IN / 409-6IN is equipped with advanced functions like digital filtering, password setting, input and output protection and square root function for optimum process functionality.
Model 409-4IN and 409-6IN are the use in various application like outdoor display indicator,large display temperature indicator,large display process indicator etc.
Product Details:
| Control Type | PID On/ Off |
| Voltage | 220-240 V |
| Weight | 160g Approx. |
| Model Name/Number | TC548-TC596-TC548E |
| Size | 1/4 DIN |
| Brand | Masibus |
| Display Type | 4 Digit/7 Segment |
| Control output Type | Relay/SSR |
Masibus TC596 / TC548 / TC548E On/Off – PID temperature controller is a cost effective model designed to offer outstanding control performance in a compact package providing a comprehensive solution for a wide variety of applications: such as plastic manufacturing, packaging machinery and food processing applications requiring precise control.
TC596 / TC548 / TC548E On/Off – PID temperature controller accepts process input suitable for Thermocouple, RTD. It also has average energy demand parameter used for diagnosing the process healthiness.
TC596 controller has one 0.56”, 4 digit LED display for process value whereas TC548 controller has one 0.4”, 4 digit LED display for process value. TC548E controller has one 0.4”, 4 digit white LED display for process value and 0.31”, 4-digit Green LED display for set point value. Configuration is done with three front tactile keys that ensures easy programming.
Model TC596 / TC548 / TC548E On off controller / PID controller has one 10A relay output for On/Off, Control function auto-tuning adjusts the PID parameters for desired set-point according to the current process dynamics so it has no harmful effect on the current operation. Model TC596 / TC548 controller has SSR (control o/p) whereas model TC548E has 2nd 5A relay (alarm output) or SSR (control o/p).
Model TC596 / TC548 / TC548E Process controller is used as a universal input temperature controller,On off temperature controller and PID temperature controller in different Application.
Product Details:
| Voltage Type | AC |
| Brand | Masibus |
| Model | PDA/PDV |
| Weight | 0.4 Kg |
| Mounting Type | DIN-Rail |
| Case Material | Abs |
| Packaging Type | Box |
| Country of Origin | Made in India |
The Masibus PDA / PDV is used to measure and convert AC current or voltage input into a load independent DC current or voltage output signal. Output signal generated is proportional to the root mean square value of the input current or voltage.
It is equipped with two load-independent, galvanically-isolated analogue outputs that can be configured for different input range and output curves.
AC transducer offers an economical and accurate means of current & voltage measurement on systems where transducers are calibrated to true RMS measurement. AC transducers are having its application to interface with RTUs.
Masibus make transducers are also available with dual output option. It provides accuracy class 0.2 with up to 3 KV isolation. All transducers performs with exceptional accuracy, repeatability and reliability. In addition to being most accurate, our transducers are equally preferred by OEMs/ end users to other
Product Details:
| Model Name/Number | LC12 |
| Material | Plastic |
| Display Type | Digital |
| Usage/Application | Industrial |
| Brand | Masibus |
| Packaging Type | Box |
| Size | 185.6 mm x 97.1 |
| Country of Origin | Made in India |
Masibus uCAL model UC12 Universal Calibrator is the compact, rugged and easy to use hand held device with graphical user interface for precise measuring and sourcing of electrical and physical parameters. Masibus UC12 Universal Calibrator is designed to provide the best accuracy in all modes of operation.
UC12 has Source and Measurement capability with independent parameter and range selection for Source and Measure. UC12 has mA/ V/ mV/ mA (24V)/ Switch-test / RTD/ TC/ Frequency/ Pulse measurement capability and also has mA/ V/ mV/ mA (2W)/Resistance/ RTD/ TC/ Frequency/ Pulse source capability.
There is an isolation between measure and source/ measure sections. UC12 Universal Calibrator has easy to operate short cut keys SCR1 and SCR2 for input selection for measure and source/ measure respectively. Automatic step/ ramp output with Auto/ Man selection, data logging, Max/ Min/ Average values, scaling to Engineering units and filter settings enhances the use of Universal Calibrator.
It has been designed to give maximum Battery life on full charge, the backlight is adjustable for power saving and the display can be programmed to automatically enable the glance screen when not in use.
UC12 comes with a Mini USB connector for charging, logged data retrieval and firmware upgrade. Standard accessories provided are patch cables, charger, USB cable, instruction manual, logged data retrieval software CD and calibration certificate, all in an attractive carrying case.
Product Details:
| Model Name/Number | LC12 |
| Material | Abs |
| Display Type | Digital |
| Brand | Masibus |
| Packaging Type | Box |
| Size | 185.6 mm x 97.1 |
| Features | Advanced |
| Country of Origin | Made in India |
iCAL model LC 12 is the Ultimate Loop Calibrator for sourcing, measuring and simulating Loop current, mV and V. It is compact, rugged and easy to use hand held device with graphical user interface.
LC 12 has simultaneous Source and Sense capability with independent parameter and range selection for source and sense, also the source and sense circuits are isolated from each other. Masibus LC 12 Loop Calibrator is designed to provide base accuracy of 0.02% of Reading in all modes of operation. 2W simulate and Read/Power are unique features for Loop testing and calibration.
It has been designed to give maximum Battery life on full charge, the backlight is adjustable for power saving and the display can be programmed to automatically switch off when not in use.
Automatic Step/ Ramp output with Auto/ Man selection, data logging, Max/ Min/ Average values, scaling to Engineering units and filter settings enhances the use of LC 12 makes it multifunctional. LC 12 has Automatic Switch test feature.
LC 12 comes with a Mini USB connector for charging, logged data retrieval and firmware upgrade, standard accessories provided patch cables, charger, USB cable, instruction manual, logged data retrieval software CD and calibration certificate, all in an attractive carrying case.
Product Details:
| Network Type | 4G |
| Number Of Ports | 1 x RJ45 (10/100Mbps), 1 x RS-485 |
| Usage/Application | Industrial |
| Compatible Brand | Masibus |
| Power Supply | +24V DC (+-10%) Ext. power supply |
| Operating Temperature | 0 DegreeC to +55 DegreeC |
| Antenna | Antenna Connector: 1 x SMA (female) |
| Country of Origin | Made in India |
Masibus IIoT Gateway with Cloud Connectivity- MSG-21 is the most cost effective MQTT gateway that provides easy way of connecting Modbus serial devices to MQTT server via cellular network, truly a plug and play solution for connecting Industrial devices to IIoT system, it is a compact protocol converter cum gateway that converts Modbus serial data to MQTT IIoT data.
The MSG-21 gateway can be remotely configured via it’s web server and can be easily set up to read serial devices like Drives, PLC, IO modules, HMI, etc., the MQTT publishing interval is programmable.
The MSG-21 gateway allows a fast and easy access to the IIoT world and is compatible with all IIoT servers that supports MQTT protocol. It provides encrypted communication using TLS / SSL protocols, ensuring a secure and safe communication.
The MSG-21 gateway is simple to install and easy to manage and having an integrated web server to allow the user to configure the device parameters (MQTT, Ethernet, Modbus).The MSG-21 is the most cost effective gateway that provides easy way of connecting modbus serial devices to MQTT server via cellular network, truly a plug and play solution for connecting industrial devices to IIoT system, it is a compact protocol converter cum gateway that converts modbus serial data to MQTT IIoT data.
The MSG-21 can be remotely configured via it’s web server and can be easily set up to read serial devices like drives, PLC, IO modules, HMI, etc., the MQTT publishing interval is programmable.
The MSG-21 allows a fast and easy access to the IIoT world and is compatible with all IIoT servers that supports MQTT protocol. It provides encrypted communication using TLS / SSL protocols, ensuring a secure and safe communication. The MSG-21 is simple to install and easy to manage and having an integrated web server to allow the user to configure the device
parameters (MQTT, Ethernet, Modbus).